LEDKINGDOMUS Rear Bumper Compatible with 07-18 Jeep Wrangler JK and JK Unlimited, Off Road Back Bumper w/ 2x LED Lights & 2" Hitch Receiver Textured Black

Nice bumper, installed it myself , took about an hour and a half. Packaged well but did have a small dent on the bull bar. It was on the side that faces the radiator so you won’t see it unless you’re looking for it. Upgraded the bolts that attached the bull bar as I felt like the supplied bolts could be bigger. No big deal as I had bolts at home that did the trick. Looks great on the old TJ. Jury’s still out on mounting a winch as the metal is not quite as thick as the factory bumper. Would like to know if anyone has a winch installed and how it worked on the bumper. As far as impact goes even the factory bumper will bend if hit hard enough. Overall satisfied with my purchase.

It’s inexpensive, easy to install, and looks great.But it’s thinner metal than I expected (which at least makes it light), and you’ll need bolts for fog lights as well as wiring harness extensions.On my daughter’s mall crawler 2012, it’s perfect. I wouldn’t trust it with a winch, and it’ll likely take damage if she bumps anything- still recommend.

I gave this a 5-Star review as long as you’re aware that this bumper is of a lighter gauge steel and not the 1/8”-3/16” thick steel used for heavy duty off-road crawling. is good for functional use as a tire carrier for light trails and mall crawling. The supplied bearings are very nice quality. Fit, function and finish were all great. Installation took about an hour by myself. My Jeep has a 1-1/2” body lift, so the tire swingarm and turnbuckle mounting points didn’t line up, but was easily compensated for with a quick trip to the hardware store for a solid steel standoff to lower the mounting point. Mounted on a 2007 Jeep JKU Rubicon, 6” suspension lift, 1-1/2” Body lift, 37” tires. I also run 40” tires and with the body lift there is clearance for a 40” spare… without the body lift, a 38” spare is a tight fit buy will fit.

It's not 3/16 plate, so it's a bit thin/light. The lightness is nice for weight saving, but it's not as stout as i would prefer it to be. The fit was good though a little snug up against the grill to run the winch wires, but over all a decent product.

First issue: If you don't like being misled, this is an issue, otherwise, move on. So, there is no company/brand LEDKINGDOMUS. If you read the Q&A you will see there are answers by YITAMotor, the actual company/manufacturer, and none by LEDKINGDOMUS. The YITAMotor (model number: Y01-J102-yita) and LEDKINGDOMUS (model number: ‎LKYJ0102) are so remarkably close that it all but confirms the former statement. Lastly, just look at the pictures of the two 'brands' offerings, which would again all but solidify that they are the same.Second issue: While the bumper arrived mostly secured in its packaging, and nothing appeared damaged, that ended up not being the case. The passenger side LEDs worked at first wiring, but after one 3 to 4 mile round trip, only half the lights worked. I easily popped the clear plastic housing off to be able to multi-meter probe to see if it was something I could resolve, and lo and behold one of the bulbs had just fallen off. I removed the whole panel and re-soldered the bulb and surprisingly got it to work again. However, the plastic housing never went back on without just falling right off again. That required a hefty amount of clear silicone to seal in place. On the lights, just know that there are additional required components and work to get them running correctly and none of that stuff is included!Third issue: This was the MOST SERIOUS. In fact, this is simply DANGEROUS and I believe the bumper should not be sold because of it. Otherwise, my experience is random chance and I just got a completely defective one. Nonetheless, I attached a hitch cargo carrier basket to the hitch, and of course like many others have said, I noticed there is a decent amount of slop in the 2" opening; not too big a deal. The DANGEROUS issue, though, was that just under the weight of the cargo carrier and a case of water, the hitch started to deflect downward a degree or two or three. I added one more Tupperware tote, bringing the total weight on the hitch to about 100 pounds and the hitch deflected approximately 5 to 15 degrees downward. I scrapped the camping trip, needless to say, and now have a bumper that is purely show and zero utility. Needless to say, at this point I would not use it at all - not even for looks - and I also do not trust the D-ring/shackle mounts to not fail under even the slightest load! BEWARE!!

Waited a year after purchase to write this review. I don't usually write reviews but I feel like I've given this product enough use to give it an honest review . It did not bolt right up onto my TJ , which was probably the only downside of this bumper. It 'almost' bolted right up, but one bracket was welded just slightly crooked and I had to widen the bolt holes on that bracket just a bit to compensate... Not a big deal... IF YOU HAVE A DREMEL OR DRILL WITH A DIAMOND OR CARBIDE BIT. It also only had a few bolts... For 6 bolt holes ? Anyway once it was mounted up properly it looks good. And it's sturdy . I have winched on it hard, countless times, with a 12000 pound winch, in deep snow, mud, at improper angles even. I was , unfortunately, in two medium level fender benders with this bumper on and both times the other car was damaged and the Jeep had almost no damage whatsoever . One bracket bent up slightly in the second collision but that's about it. I've rammed it against trees , just generally beat on it. Took it off a few months ago and sprayed or with some Rustoleum trim and bumper paint (it had some minor scratches) and it looked brand new again. If you can tinker with the install a bit this is a great value. They even shipped it to Alaska free. LEDS on it are worthless. My Badlands winch mounted right up so easy. My Warn 9500 did not fit, newer Warns probably will? Would buy again for sure. One thing worth mentioning is if you're running 35s the corners of the bumper get into the tire line just slightly and could rub when articulating fully.

Fits just perfect. Bolt paint is a little thick for the wrenches to fit perfect. All lights work. It isnt a high dollar bumper, but it looks like it is. Great product at a great price.